We all know that no matter what everything is all must be maintained, so as to promote the application of things to do long-term difficult to use. I do not know CNC machining core is also this, CNC equipment proper method and maintenance is proper application of CNC equipment is one of the main factors, in a reasonable use of the application to avoid abnormal damage to CNC lathes, to prevent high-precision cnc machining sudden common failures; daily maintenance, machine equipment to maintain a stable process situation, slow down the deterioration process, timely processing and elimination of common failures safety hazards. Always ensure to ensure the safety of operation.

    A, the application of CNC equipment natural environment to enhance the use of CNC equipment period, the general provisions to prevent the sun can be direct sunlight and other radiation Custom Precision CNC Machining  heat, to prevent too wet and cold, too much soot or leaching vapor site. High-precision CNC equipment to avoid the vibration of large machines and equipment, such as high-speed punching machines, casting machines and equipment.

    Second, excellent switching power supply to ensure that in order to better prevent switching power supply changes in frequency (more than ± 10%) and most likely a moment of electromagnetic interference and other hazards, machining and manufacturing CNC equipment generally choose a dedicated line of transport power supply system (such as from the distribution room indoor distribution all the way independent for CNC machine applications) or add a voltage regulator equipment, CNC spiing processing can be to reduce the quality of the power supply system interference and Electrical equipment impact. Read recommendation: CNC precision machining processing process of the joint knife mark solution

    Third, the development of reasonable practical operation of technical specifications in the application and management of CNC machine tools, should develop a series of practical, feasible operating procedures. For example, wetting, maintenance, rational use and standard handover system is the specific content of the application and management methods of CNC equipment. Formulation and compliance with CNC precision machining operating procedures is one of the key methods to ensure the safe operation of CNC machine tools. Practical experience has proven that many common failures can be reduced by compliance with operating procedures.

Imported CNC machining center application is about the quality of spare parts processing, thus, cnc hardware processing standardized operating process can help us reasonably improve the yield rate. The general operating process is shown below.

1、Start up in advance preparation

CNC lathe in each start-up or according to the variable calibration, first Custom Precision CNC Machining  cnc machining factory back to the CNC lathe reference zero position (i.e. back to zero), so that the CNC lathe has a standard part for its actual operation afterwards.

2、Clamping workpiece

Workpiece should be cleaned up before clamping each surface, not to be stained with oil, iron pin and dust, and use thwart (or grinding stone) to remove the burrs on the surface of the workpiece.

Clamping with high speed rail cars must be polished by CNC grinding machine each surface, so that it is smooth and flat. Code iron, nut must be firm, can be stable clamping workpiece, for some difficult to clamp small workpiece can be immediately clamped on the tiger; machine table should be clean and tidy, no iron pin, dust, oil stains; pad block generally put into the coers of the workpiece, the span of the workpiece is too large need to put in the middle of the contour pad block.

3、The workpiece touch number

The workpiece can be clamped with the number of touches to carry out the number of touches to determine the production and processing reference position, the number of touches can be optical and foot type two. There are two kinds of ways to touch the number and side touching the number in the division

4、Prepare all the tools according to the safety operation procedure

cnc machining price according to the program to write the safety operating procedures of the tool data information, change the tool to carry out production processing, let the tool to touch the relative height measuring device placed on the reference point, when the green light on the measuring device set the relative plane coordinates of this point to zero. Move the tool to the safe area, manually move the tool downward by 50mm, set the relative plane coordinates of this point to zero again, and this point is the zero position of Z axis.

5、Start production processing

When implementing each program process, you need to check carefully whether the tool used is the specific tool in the specific instruction book. Gradually production processing to boring rate to small, each section of the implementation, rapid and accurate positioning, drop tool, go tool when the need to centralize the spirit of substance, the hand should be put on the termination key any problems immediately terminate, pay attention to the observation of the tool fitness movement orientation to ensure the safety of the tool, and then gradually greater go tool rate to suitable, at the same time to the tool and workpiece to add freezing liquid or cold air.